SURFACES REPORTER is India's 1st and only Architecture and Interior Design magazine dedicated to products and materials.
 

Stunning Fireplaces & Stove by La Nordica

La Nordica Extraflame brings forward new product- evolution line under the new Top of the Range product line. Originated in 1968, La Nordica has carefully designed a functional item along with a charming design

La Nordica Extraflame brings forward new product- evolution line under the new Top of the Range product line. Originated in 1968, La Nordica has carefully designed a functional item along with a charming design also by maintaining the high standards. The product line showcases an ideal balance between low emissions and consumption, sustainability of heating, and is convenient in regular use. 

The range includes:

Monoblocco 1000 Evo - Wood Fireplace

Monoblocco 1000 Evo - Wood Fireplace

As per the company, this wooden fireplace comes with several benefits; including a large glass door with 45° opening to make it easier to clean inside, a big hearth opening (87 cm long, 34.5 high) and an extra sturdy and thick cast iron hood with a Power Radiant System.

Along with several features, the firebox is also covered with Nordiker refractory stone that guarantees high performance and makes the flame very bright. Besides, it has a built-in extraction system which allows this efficient product to transfer the generated heat in other areas.

Milly – A Wood Burning Cooker

Milly – A Wood Burning Cooker

La Nordica’s wood-burning cooker is a large, enamelled 78-litre oven that has a double gas fire door. The unique and functional design of this cooker is the result of attention and care. The polished cast iron is used in the making of top cooking plate and rings. The Milly Cooker is ideal in any kitchen and finishes any traditional or contemporary home.

An optional food warmer, which is coated in lava stone and stainless steel, is an additional accessory. The outer casing of this fantastic cooker is in enamelled stainless steel and fine majolica. The hearth and the configuration for an external air inlet are layered in Nordiker fire-resistance stone all guarantee protection, efficiency, and excellent performance.

Terry Plus - Ducted Pellet Stove

Terry Plus - Ducted Pellet Stove

It has a sealed combustion chamber, an efficient ducting system and an airtight tank, which makes it an ideal solution to keep your home comfortably warm by simply setting the required temperature from the practical hand-held remote control which is also a room thermostat, and the wireless thermostat kit for the other rooms.

It is due to the presence of three separate and thermostatically-controlled centrifugal motors- one dedicated to front ventilation with a flow rate of 400 m3/h and two dedicated to the two ductable outlets of up to 8 metres each. There are numerous benefits provided by the series are the beautiful majolica top cladding, the ceramic glow plug, for fast ignition, the self-cleaning brazier and pellet loading with a gentle and efficient brushless motor.

Angela And Angela Plus - Ventilated And Ducted Pellet-Burning Stove

Angela And Angela Plus - Ventilated And Ducted Pellet-Burning Stove

The Evolution line, pellet-burning stove comes in the ventilated or ducted version. Along with airlock and airtight tank, this product with a nominal power of 8 kW is equipped with lateral shell and tube heat exchanger and cast iron combustion chamber and brazier.

Managing this pellet-burning stove is quite simple because of its practical, multifunctional, handheld device, which is also a thermostat, which offers the desired temperature at anywhere in the room. Equipped with an additional ducting motor, the ducted version of Angela Plus allows you to carry heat up to 8 metres through a rear outlet.

About Surfaces Reporter

Surfaces Reporter is India’s 1st magazine specialized on “products & materials” for architecture & Interiors! The prime objective of Surfaces Reporter magazine is to contribute positively to the Indian material industry, with unbiased information & awareness initiatives.

Surfaces Reporter magazine has a clear & niche target group comprising of Architects, Engineers, Builders, Interior Designers, Manufacturers, Celebrities, Showrooms, Consultancy firms, and Leading Business houses, Hotels & Restaurants, and PMCs etc. If you have a Product or Project worth publishing in Surfaces Reporter, please email us hello@surfacesreporter.com or you can also submit your project online.

Like Surfaces Reporter on Facebook | Follow us on Twitter and Instagram | Subscribe to our magazine | Sign Up for the FREE Surfaces Reporter Magazine Newsletter

Post Your Comment




top stories

An Illuminating Hole

An Illuminating Hole

The brass sculpture lamps, designed by Florencia Costa, treat light as a matter, with its own consistency and body, able...

 Innovative technology for assembling of mosaics through Robot

Innovative technology for assembling of mosaics through Robot

Palladio is a palette of glass mosaics that allows the designers an unbelievable range of colours and textures.

How Aluminium Composite Panels have evolved dramatically over the years? Let us hear it from Mr Ashok Kumar Bhaiya, CMD, Aludecor

The whys & hows of Aluminium Composite Panels from Mr Ashok Kumar Bhaiya, CMD, Aludecor

Aludecor is one of the most sought after brands for ACPs in India, and an engaging conversation with Mr Ashok Kumar Bhai...

More Stories